UPSC Engineering Services Examination 2027: The Union Public Service Commission (UPSC) has released the official notification for the Engineering Services Examination (ESE) 2027. The examination is being conducted for recruitment to various engineering services and posts under Civil, Mechanical, Electrical, and Electronics & Telecommunication Engineering categories.
According to the official notification, approximately 480 vacancies are expected to be filled through the Engineering Services Examination 2027, including 19 vacancies for Persons with Benchmark Disabilities (PwBD). The vacancy figure is provisional and may be changed by the Commission.
The online application process has started on 16 September 2026 and eligible candidates can submit their applications through the UPSC online application portal up to 6 October 2026 till 6:00 PM. The Preliminary Examination is scheduled for 31 January 2027, while the Main Examination is scheduled for 18 June 2027.
UPSC ESE 2027 Online Form: Overview
The Engineering Services Examination is conducted in multiple stages, beginning with an objective-type Preliminary Examination and followed by the Main Examination and Personality Test/Interview.
The examination covers four major engineering disciplines and candidates can apply for only one of the specified categories.
| Particular | Details |
|---|---|
| Exam Name | Engineering Services Examination 2027 |
| Conducting Authority | Union Public Service Commission (UPSC) |
| Notification Date | 16 September 2026 |
| Application Start Date | 16 September 2026 |
| Last Date to Apply | 6 October 2026, up to 6:00 PM |
| Preliminary Examination | 31 January 2027 |
| Main Examination | 18 June 2027 |
| Expected Vacancies | Approximately 480 |
| Engineering Categories | Civil, Mechanical, Electrical, Electronics & Telecommunication |
| Application Mode | Online |
| Application Portal | upsconline.nic.in |
| Examination Fee | Rs. 200 for applicable candidates |
UPSC Engineering Services Examination 2027 Vacancy
The Commission has indicated approximately 480 vacancies for the Engineering Services Examination 2027. The notification also includes 19 vacancies for PwBD candidates, although the number of vacancies can be altered by the Commission.
Recruitment will be carried out across four engineering categories, covering several Group-A and Group-B services and posts.
- Category I: Civil Engineering
- Category II: Mechanical Engineering
- Category III: Electrical Engineering
- Category IV: Electronics & Telecommunication Engineering
The notification mentions reservation provisions for eligible candidates belonging to SC, ST, OBC, EWS and PwBD categories as per Government of India rules.
Civil Engineering Services
The Civil Engineering category includes services such as Central Engineering Service, Central Engineering Service (Roads), Survey of India Group 'A' Service, Central Water Engineering Service, Indian Skill Development Service, Indian Railway Management Service (Civil), and Indian Defence Service of Engineers, among others.
Mechanical Engineering Services
The Mechanical Engineering category includes posts and services such as GSI Engineering Service, Indian Naval Material Management Service, Defence Aeronautical Quality Assurance Service, Indian Railway Management Service (Mechanical), Indian Defence Service of Engineers, Indian Naval Armament Service and Central Power Engineering Service.
Electrical Engineering Services
The Electrical Engineering category includes Central Electrical & Mechanical Engineering Service, Central Power Engineering Service, Defence Aeronautical Quality Assurance Service, Indian Railway Management Service (Electrical), Indian Defence Service of Engineers and Indian Naval Armament Service, among other posts.
Electronics & Telecommunication Engineering Services
This category includes Indian Radio Regulatory Service, Indian Telecommunications Service, Indian Naval Material Management Service, Indian Naval Armament Service, Indian Skill Development Service, Junior Telecom Officer, Indian Railway Management Service (Signal & Telecommunication), and Central Power Engineering Service.
UPSC ESE 2027 Eligibility Criteria
Candidates should carefully check the eligibility requirements before submitting the application because admission at different stages remains provisional until the prescribed eligibility conditions are verified.
The main eligibility requirements relate to nationality, age, educational qualification, medical fitness and physical standards.
Nationality
A candidate must satisfy one of the nationality conditions specified in the notification. This includes an Indian citizen and certain specified categories of citizens or persons of Indian origin subject to the applicable Government of India eligibility certificate requirements.
Age Limit
For Engineering Services Examination 2027, a candidate must have attained 21 years and must not have attained 30 years as on 1 January 2027. Accordingly, the candidate should have been born not earlier than 2 January 1997 and not later than 1 January 2006.
The notification provides specified age relaxations for eligible categories, including SC/ST, OBC, certain Government servants, Ex-servicemen and PwBD candidates. The applicable relaxation depends on the conditions mentioned in the official rules.
Educational Qualification
The basic educational requirement is an eligible Engineering degree from a recognised university or institution. The notification also specifies certain alternative qualifications, including prescribed Institution of Engineers examinations and qualifications recognised for particular engineering services.
For certain Electronics-related services, specified M.Sc. qualifications may also be accepted under the conditions mentioned in the notification. Candidates with qualifying examinations whose results have not yet been declared may also apply in specified circumstances, subject to the conditions and subsequent production of proof of qualification.
UPSC ESE 2027 Application Fee
The examination fee for candidates who are required to pay is Rs. 200. Payment can be made through the prescribed online payment modes such as net banking, Visa/Master/RuPay credit or debit card and UPI.
Female candidates and candidates belonging to SC, ST and PwBD categories are exempted from payment of the examination fee. OBC and EWS candidates do not receive fee exemption under this provision and are required to pay the prescribed fee.
How to Apply for UPSC ESE 2027
The application process is completely online. Candidates should read the instructions carefully before entering information and uploading documents.
The UPSC application system uses a Universal Registration Number (URN), Common Application Form (CAF) and an examination-specific module.
- Visit the UPSC online application portal.
- Create or access the required registration/profile.
- Complete the Universal Registration Number (URN) related requirements.
- Complete the Common Application Form.
- Upload the required photograph and capture the live photograph as instructed.
- Upload the required signature.
- Enter examination-specific information, including engineering discipline and examination centre.
- Upload or provide the required supporting information and documents.
- Pay the applicable examination fee.
- Review all details carefully and submit the application.
- Keep the generated application number and URN safely for future communication.
The notification specifically states that candidates must apply online through the UPSC application portal and that no other mode of application is allowed. It also states that withdrawal or correction of the submitted application is not permitted, so candidates should verify their information before final submission.
Documents Required for UPSC ESE Application
Candidates should keep the necessary documents ready before beginning the application process to avoid delays during form submission and document uploading.
The notification identifies several documents and supporting certificates that may be required depending on the candidate's claims and category.
- Age/Date of Birth certificate
- Engineering educational qualification certificate
- SC/ST/OBC/EWS certificate, wherever applicable
- Age or fee concession certificate, wherever applicable
- PwBD certificate, wherever applicable
- Valid photo identity document
- Required photograph and signature
The notification also requires candidates to provide details of a photo ID such as Aadhaar Card, Voter Card, PAN Card, Passport, Driving Licence or another Government-issued photo ID.
UPSC ESE 2027 Exam Pattern
The Engineering Services Examination is conducted in three stages: Preliminary Examination, Main Examination and Personality Test/Interview.
The marks obtained in the different stages are used for determining the final order of merit according to the examination scheme.
| Stage | Paper | Duration | Marks |
|---|---|---|---|
| Stage-I Preliminary | General Studies & Engineering Aptitude | 2 Hours | 200 |
| Engineering Discipline Paper | 3 Hours | 300 | |
| Preliminary Total | 500 | ||
| Stage-II Main | Engineering Discipline Paper-I | 3 Hours | 300 |
| Engineering Discipline Paper-II | 3 Hours | 300 | |
| Main Total | 600 | ||
| Stage-III | Personality Test/Interview | As prescribed | 200 |
The Preliminary Examination carries 500 marks, the Main Examination carries 600 marks and the Personality Test/Interview carries 200 marks.
Negative Marking
There is negative marking in the objective-type Preliminary Examination. For every wrong answer, one-third of the marks assigned to that question is deducted. If more than one option is marked for a question, it is also treated as a wrong answer. No penalty is imposed when a question is left unanswered.
UPSC ESE 2027 Syllabus
The syllabus is divided into General Studies and Engineering Aptitude and the discipline-specific engineering subjects. Candidates should prepare according to their selected engineering category.
The General Studies and Engineering Aptitude paper is common to candidates from all four engineering disciplines.
General Studies and Engineering Aptitude
- Current issues related to national and international social, economic and industrial development
- Logical reasoning and analytical ability
- Engineering Mathematics and Numerical Analysis
- General principles of design and drawing
- Safety and engineering practices
- Standards and quality practices
- Energy conservation and environmental issues
- Climate change and environmental impact assessment
- Basics of project management
- Material Science and Engineering
- Information and Communication Technologies and engineering applications
- Ethics and values in the engineering profession
The notification states that questions will be set from all ten listed areas, with the marks for an individual topic potentially ranging from 5% to 15% of the paper.
Engineering Discipline Subjects
The discipline-specific syllabus covers the technical subjects associated with the candidate's selected engineering category.
- Civil Engineering: Building Materials, Solid Mechanics, Structural Analysis, Steel Structures, Concrete and Masonry Structures and other prescribed Civil Engineering areas.
- Mechanical Engineering: Candidates should follow the detailed Mechanical Engineering syllabus prescribed in Section III of the notification.
- Electrical Engineering: Candidates should prepare the subjects listed under the Electrical Engineering syllabus in the official notice.
- Electronics & Telecommunication Engineering: Candidates should follow the technical syllabus prescribed for Electronics and Telecommunication Engineering.
The official syllabus states that the General Studies and Engineering Aptitude paper is designed around the level expected from an Engineering/Science graduate, while the other papers are approximately at the level of an Engineering Degree Examination of an Indian University.
UPSC ESE 2027 Examination Centres
The Preliminary Examination will be conducted at various centres across India, subject to the Commission's conditions and availability of seats at each centre.
The notification includes Cuttack and Sambalpur among the listed Preliminary Examination centres in Odisha.
- Agartala
- Ahmedabad
- Bangalore
- Bhopal
- Chandigarh
- Chennai
- Cuttack
- Dehradun
- Delhi
- Hyderabad
- Kolkata
- Mumbai
- Patna
- Raipur
- Ranchi
- Sambalpur
- Thiruvananthapuram
- Visakhapatnam
The Commission has stated that centre allotment is subject to capacity limits at most centres and is based on a first-apply-first-allot basis. Candidates are therefore advised to apply early if they have a particular centre preference.
Important Instructions for Candidates
Several application and examination instructions in the notification are important to remember before applying and appearing for the examination.
Careful attention to these instructions can help candidates avoid problems related to applications, documents and examination-day procedures.
- The application must be submitted online only.
- Candidates should carefully verify their details before final submission.
- The submitted application cannot be withdrawn.
- No correction or modification is permitted in the submitted application.
- A valid and active email ID should be maintained.
- Black ball pen is required for marking answers in the OMR sheet.
- Calculators are not permitted in objective-type papers.
- Battery-operated pocket calculators may be used in conventional-type papers as permitted by the notice.
- Mobile phones, smart watches, Bluetooth devices and other prohibited electronic devices are not allowed inside the examination venue.
- Entry to the examination venue closes 30 minutes before the commencement of each session.
- Face authentication is mandatory at the examination venue.
The notification also states that candidates must undergo medical examination if finally recommended and must satisfy the prescribed physical standards applicable to the Engineering Services Examination.
UPSC ESE 2027 Selection Process
The selection process is carried out through three examination stages. Candidates first appear in the Preliminary Examination, and those qualifying under the Commission's criteria proceed to the Main Examination.
Candidates meeting the required qualifying criteria in the written stages may then be called for the Personality Test/Interview.
- Stage-I: Engineering Services Preliminary Examination
- Stage-II: Engineering Services Main Examination
- Stage-III: Personality Test/Interview
The notification states that the number of candidates admitted to the Main Examination will be approximately six to seven times the total approximate vacancies, while candidates called for the Personality Test/Interview will be about twice the number of vacancies.
UPSC ESE 2027 Important Dates
Candidates should keep the important dates in mind because the application portal will close at the specified deadline.
The Commission has announced the following schedule in the Engineering Services Examination 2027 notification.
| Event | Date |
|---|---|
| Notification Released | 16 September 2026 |
| Online Application Starts | 16 September 2026 |
| Last Date to Apply | 6 October 2026, up to 6:00 PM |
| Preliminary Examination | 31 January 2027 |
| Main Examination | 18 June 2027 |
What Candidates Should Check Before Applying
Before submitting the application, candidates should compare their educational qualification, age and category-related requirements with the official rules.
It is also important to select the engineering discipline and examination centre carefully because the notification contains specific provisions regarding these choices.
- Check your date of birth against the prescribed age range.
- Confirm that your engineering qualification is accepted under the notification.
- Select only the engineering category for which you are eligible.
- Keep required certificates ready before applying.
- Check your photo and signature carefully before uploading.
- Keep the selected examination centre in mind before completing the form.
- Review every entry before final submission.
- Save the URN and application number for future reference.
UPSC ESE 2027 Important Links
Use the official UPSC resources below to check the notification, submit the application and access the Commission's website.
| Service | Link |
|---|---|
| Official Notification | Click Here |
| Apply Online | Click Here |
| Official Website | Click Here |
Follow Us for Latest Job Updates
Want quick updates about government jobs, recruitment notifications, exam dates, admit cards and results? Follow OdishaGovtExam.Com on WhatsApp and Telegram so you can receive important updates directly.
Follow us on WhatsApp and Telegram for regular Government Job & Education Updates.
📱 Follow WhatsApp Channel ✈️ Join Telegram Channel
FAQ
When was the UPSC Engineering Services Examination 2027 notification released?
The notification was released on 16 September 2026.
What is the last date to apply for UPSC ESE 2027?
The last date to submit the online application is 6 October 2026 up to 6:00 PM.
How many vacancies are expected in UPSC ESE 2027?
Approximately 480 vacancies are expected to be filled, including 19 vacancies for PwBD candidates. The vacancy number may be altered by the Commission.
What are the engineering disciplines available in ESE 2027?
The four categories are Civil Engineering, Mechanical Engineering, Electrical Engineering, and Electronics & Telecommunication Engineering.
What is the application fee for UPSC ESE 2027?
The prescribed fee is Rs. 200 for candidates who are required to pay. Female, SC, ST and eligible PwBD candidates are exempted from the fee.
When will the UPSC ESE Preliminary Examination 2027 be held?
The Preliminary Examination is scheduled for 31 January 2027.
When will the UPSC ESE Main Examination 2027 be held?
The Main Examination is scheduled for 18 June 2027.
Is there negative marking in UPSC ESE Preliminary Examination?
Yes. For each wrong answer in the objective-type papers, one-third of the marks assigned to that question is deducted. No penalty is imposed for an unanswered question.
Conclusion
The UPSC Engineering Services Examination 2027 provides an opportunity for eligible engineering graduates to compete for recruitment to several engineering services and posts under the Civil, Mechanical, Electrical and Electronics & Telecommunication categories. The notification indicates approximately 480 vacancies and provides a three-stage examination process consisting of Preliminary, Main and Personality Test/Interview.
Interested candidates should check the official notification carefully before applying, particularly the eligibility conditions, engineering discipline, age requirements, documents, fee provisions and application instructions. Since the application deadline is 6 October 2026 at 6:00 PM, candidates should complete the online application well before the closing time.